K-200

Apply for:

1. Wipe and clear rust and sludge in wire-cutting processing equipment , Excellent on copper, stainless steel and aluminium.
2. Most suitable for wiping and removing rust of large-size work pieces incapable of being dipped
3. Remove the rust formed during wire EDM operation
4. Clean the sludge formed on wire EDM and wire guide
5. Remover the rust formed on metal parts and equipment’s during storage and in other processes

Rust Remover with Metal Surface Protection for High Quality Die/Mould production!

CHARACTERISTIC

Strong Rust Grease Removal Property

Quickly remove rust (5-10 minutes) while protecting metal surface.

Due to its degreasing properties, enables to remove rust from oily metal surface and clean sluge on wire EDM.

Metal Surface Protection

Revive lustrous metal surface without causing discolouration.

Enable to challenge high quality Die/Mould production as precise as micro meters.

Anticorrosion

Rust Remover K-200 contains some particles with anticorrosive properties, therefore it prevents excess corrosion and rust recursion.

Safety

Rust Remover K-200 composed with harmless compounds to people.

Unlike hydrochloric acid or nitric acid, produce no poisonous gas, irritation.

Prevent surrounding machinery from rusting.

Non flammable, non explosive

PROPERTY

DIRECTION FOR USE

Immersing use

1. Immerse reused work piece into undiluted Rust Remover K-200 for 5-10 minutes.

Rinse with water immediately after removed rust.

Note: Use plastic container for immersion.

2. Immerse into anticorrosive agent then dry it by air blower or by using a rag.

3. Once discolouration occurs or rust removal properties have noticeably decreased, it is advisable that the content is replaced with new agent rather than addition of new agent to content. This replacement procedure improves overall efficiency and durability of the agent.